Other tabs (apart from the main Data Collection tab) on the TD Data Collection screen include:
- Change Leads Tab: Change the status of a channel or turn a channel on/off by clicking on the lead/channel. It will then be displayed (or hidden) during data collection.
- Retort Info Tab: Enter information about the retort.
- TD Test Info Tab: Change test information and test targets.
- Notes Tab: Take notes during the test.
- Log Data Tab: Enter other readings during the test such as TID, Chart Recorder, Pressure, etc.
- Calibration Tab: Create or apply calibration offset factors.
- Zoom Plot Tab: Access a current zoom plot of the leads.
- Set Lead Locations Tab: Record or "map" the location of the TD leads in the retort.
All of the features within these tabs can be accessed/performed after testing has been completed as well. For more information on these features, click on one of the following:
Change Leads (Equipment)
Retort Info (TD File Screen)
TD Test Info (TD File Screen)
Notes (TD File Screen)
Log Data
Calibration
Zoom Plot
Set Lead Locations